Polyamide powders

Selective laser sintering (SLS®) is used to create parts layer by layer. The powder is deposited in successive layers and a laser melts the zones of the part to produce. The parts are then adapted to functional, mechanical and heat tests. The powder is either natural or charged and can be aeronautics-certified. Learn more about our polyamide powder range.

PA2200

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: White colour, PA12, flexible, ideal for hinges/clips and resistant to temperature < 130°C
  • ADVANTAGES: Functional, mechanical, thermical properties can be tested
  • LIMITATIONS: Porous
  • PRECISION: Layer= 0.12 (P730) or 0.15mm, Minimum Wall thickness= 0.8mm
  • EQUIPMENT: 2 EOS P730 Machines – Capacity: 700 x 380 x 580 mm
  • NOTICE: Between 3 and 5 days
  • PRICE

Technical datasheet

PA3200

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: Grey colour, glass-filled, more rigid and resistant than PA2200, imitation PA6.6 GF30
  • ADVANTAGES: Functional, mechanical, thermical properties can be tested
  • LIMITATIONS: Porous
  • PRECISION: Layer= 0.12 (P730) or 0.15mm – Minimum Wall thickness= 0.8mm
  • EQUIPMENT: 4 EOS P380 Machines – Capacity: 350 x 350 x 600 mm – 1 EOS P390 Machine – Capacity: 340 x 340 x 620 mm
  • NOTICE: Between 3 and 5 days
  • PRICE

Technical datasheet

ALUMIDE

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: Aluminium grey colour, aluminium-filled, metallic appearance, easy to machine, very rigid (less distortion risk for big flat parts)
  • ADVANTAGES: Functional, mechanical, thermical properties can be tested
  • LIMITATIONS: Porous
  • PRECISION: Layer= 0.12 (P730) or 0.15mm, Minimum Wall thickness= 0.8mm
  • EQUIPMENT: 4 EOS P380 Machines – Capacity: 350 x 350 x 600 mm – 1 EOS P390 Machine – Capacity: 340 x 340 x 620 mm
  • NOTICE: Between 3 and 5 days
  • PRICE €€

Technical datasheet

CARBONMIDE

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: Black colour, carbon-filled, similar to injected parts if built flat
  • ADVANTAGES: Functional, mechanical, thermical properties can be tested
  • LIMITATIONS: Brittle on the Z axis, porous
  • PRECISION: Minimum Wall thickness= 1.5mm
  • EQUIPMENT: 4 EOS P380 Machines – Capacity: 350 x 350 x 600 mm – 1 EOS P390 Machine – Capacity: 340 x 340 x 620 mm
  • NOTICE: Depending on the amount of the order
  • PRICE €€€

Technical datasheet

PA2210 FR

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: Beige colour, flame-retardant
  • ADVANTAGES:Parts appropriate for aircraft industry – Certificates UL 94 / V-0 / FAR 25
  • LIMITATIONS: Porous
  • PRECISION: Layer= 0.15 mm – Certified for a min. Wall thickness of 2mm
  • EQUIPMENT: 4 EOS P380 Machines – Capacity: 350 x 350 x 600 mm – 1 EOS P390 Machine – apacity: 340 x 340 x 620 mm
  • NOTICE: Between 6 and 8 days
  • PRICE €€€

Technical datasheet

PA2241 FR

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: White colour, flame-retardant
  • ADVANTAGES: Parts appropriate for aircraft industry – Certificates FAR 25 / CS 25/ JAR25
  • LIMITATIONS: Porous
  • PRECISION: Layer= 0.15 mm – Certified for a min. Wall thickness of 2mm
  • EQUIPMENT:
    EOS® P396 Machine – Capacity: 350 x 350 x 600 mm
  • NOTICE: Between 3 and 5 days
  • PRICE

Technical datasheet

PA2200 HD

  • TECHNOLOGYSelective laser sintering SLS®
  • PROPERTIES: White, flexible, ideal for clips, extreme precision
  • ADVANTAGES: Very fine and detailed parts, need for precision
  • LIMITATIONS: Small parts
  • PRECISION: Minimum Wall thickness = 0.4 mm – Recommended Wall thickness= 0.7mm – Layer thickness= 60 / 100 microns
  • EQUIPMENT: 1 EOSINT P110 Formiga Machine – Capacity : 200 x 250 x 330 mm
  • NOTICE: Between 3 and 5 days
  • PRICE €€

Technical datasheet